DSP Module
SMPS Power Supply
Active Loudspeaker


     
   


The high power handling, , two channel amplifier drive unit integrates with leading edge DSP digital signal processing, RS485 control and Class D SMPS amplifier technologies to create sound reinforcement loudspeakers designed to form the complete installation solution.

FEATURES:

Temperature Monitoring.

Speaker presets for crossover frequencies, 12,18, 24dB/Oct, with Bessel, Butterworth, Lonkwitz-Riley filters.

Digital and analog Input

6 x PEQ, Low/High shelving equalizer each channel, limiting, and delay 2s.

2 AUX out with digital signal processing, can be use togther with other amp, eg, LP series.

RS485. TCP/IP interface control( optional).

PHOTO

12" 2way with AM950 Module
HF: 3" Voice coil 70W
LF:12"400W
15" Bass with AM990 Module
LF: 15" 500W

15" BASS with AM960
1x speakon with 250W power
12" 2way with AM950
15" Co-axial Monitor with AM950

PC control Software

 

 
DSP SPECIFICATIONS
Input Analog 1 Channel: max level +20dBu,10K£[impedance
pin 2 hot(+ve), electronically balanced
Digital 2 Channel: max level +0dBFs,10K£[impedance
pin 2 hot(+ve), electronically balanced
Output 4 Channel, max level +20dBu,into 600£[ impedance
pin 2 hot(+ve),electronically balanced
Dynamic Range >105dBu, 20Hz-20KHz
Frequency Response <+/-0.25dBu,15Hz With filters out
Distortion <0.01%, 20Hz-20KHz@+10dBu input level
Sampling Rate 96KHz
Crosstalk >80dBu, 20Hz-20KHz
Data FormatAD/DA Burr Brown 32-bit input and output
Crossovers Type Bessel:12¡B18¡B24or 48dB/octave¡A
Linkwitz-Riley:12¡B18¡B24or 48dB/octave¡A
Butterworth:12¡B18¡B24 or 48dB/octave
Compressor Mid-filter 2-stage limiters with threshold
of-20 to+20dBu
EQ parametric with bandwidth of 0.05 to 3.0
octaves Frequency range 20Hz to
20KHz,gain of +/-20dB in 0.1dB steps
Delay 0ms-2s
Delay Unit 21us
Connectors 1 x XLR anolog input
1 x XLR anologe out
1 x XLR digital input
1 x XLR digital output
1 x XLR Auxout
software ver 1.0

SPECIFICATIONS of AMP.
AM950
AM960
AM990
AM980PFC
DSP
yes
yes
No
No
   
   
Max output power  
   
Eia Amplifier Power Tops HF:100 w/8 ohm HF:250 w/8 ohm LF:1200 w/8 ohm LF:1800 w/8 ohm
LF:600 w/8 ohm LFt:600 w/8 ohm
1000 w/4 ohm 1000 w/4 ohm 2400 w/4 ohm 3600 w/4 ohm
(1 KHz,THD+N<1%)
Input Sensitivity
1.4V
2.6V
2.6V
Input Impedance
10 kOhm
10 kOhm
Frequency Response
Hi output:20-20KHz¡Ó1dB
20-2KHz¡Ó1dB
Low output:20-2KHz¡Ó1dB
S/N Ratio
>100dB
>100dB
Protective Circuit
switch-on delay,soft start
impedance-and short-circuit protection,
DC protect,temperature monitoring
Indicator Leds
1 signal/clip LED(double color)
RS485(RJ45)
Remote Monitoring
temperature,protect,
temperature,protect,
signals parameter control
signals parameter control
Power Supply
195 V-250 V AC 50/60 Hz,max6 A
195 V-240 V AC 50/60 Hz,max10 A
Cooling
heatsink cooling
heatsink cooling
Weight
4 kg
3.7/5 kg
Connectors
Inputs
1x XLR anolog input
1x XLR anolog input
1x XLR anologe out
1x XLR digital input
1x XLR anologe out
1x XLR digital output
1x Speakon out
1x XLR Auxout
Software
ver 1.0
  
Regal Technology Co., Ltd.
Add: No 2, Shiji Road, Jindu Town, Gaoyao City, Guangdong, China.
Tel: 86-758-8519997; Fax: 86-758-8519994; Email: export@regal.com.cn; ¸fICP³Æ06037016¸¹