CO-AXIAL SYSTEM
ACTIVE/SUBWOOFER



     
   

Co-axial System

FEATURES:

Co-axial speaker unit design
Could be used as stage monitor
DSP processing and programmable
SMPS Power supply Amplifier

SPECIFICATIONS:

MODEL
Loudspeaker
Frequency Range

Frequency Response

Dispersion
Maximum SPL
Unit / mm
Packing / mm
Weight / kg
Net weight / kg
Transducer
Low Frequency
Section
Nominal Impedance
Sensitivity
High Frequency

Nominal Impedance
Sensitivity

CX-8
8" Co-axial
65 Hz to 20 kHz
(+/-10 dB)
70 Hz to 18 kHz
( +/- 3 dB)
80degree
129 dB SPL
246x240x345
344x338x400

 

8" driver 2" Voice
Coil 200W
8 ohms
96dB
1.75" Voice Coil 1"
exit 60W
8 ohms
103dB

CX-10
10" Co-axial
60 Hz to 20 kHz
(+/-10 dB)
65 Hz to 18 kHz
( +/- 3 dB)
80degree
133 dB SPL
305x298x430
403x396x497

 

10" driver 2" Voice
Coil 250W
8 ohms
97dB
1.75" Voice Coil 1"
exit 60W
8 ohms
103dB

CX-12 / P
12" Co-axial
47 Hz to 20 kHz
(+/-10 dB)
63 Hz to 18 kHz
( +/- 3 dB)
80degree
136 dB SPL
370x361x520
448x438x592

 

12" driver 3.7" Voice
Coil 350W
8 ohms
100dB
3" Voice Coil 110W

8 ohms
106dB

CX-15 / P
15" Co-axial
45 Hz to 20 kHz
(+/-10 dB)
50 Hz to 18 kHz
( +/- 3 dB)
110degree
139 dB SPL
436x425x622
515x503x690

 

15" driver 4" Voice
Coil 450W
8 ohms
101dB
3" Voice Coil 110W

8 ohms
109dB

Active System
Internal Amplification Output
(at nominal load)
Output (Continuous IEC shaped pink
noise into rated load impedance)
Output Section
Audio Input connector
Network control connector
Signal Processing
System Management

AC Power Operating Range
AC Input Connector
AC Loop-thru
AC Current Requirement




LF:1000W / HF:350W Peak
LF:900W @ 8ohms HF:300W@4ohms 1%THD
LF:800W @8 4ohms HF:280W / 4ohms 1%THD
3-Channels(1Aux out)
XLR with loop-through (Digital input or analog input)
RS485(RJ45)
32bit floating point DSP Module
Limiters / 6EQ / HPF / LPF / Noise gate /
Thermal protection
100-120VAC or 200-240VAC, 50/60Hz
Neutrik PowerCon
Neutrik PowerCon
16A per system at 115V,
8A per system at 230V
MODEL
Loudspeaker
Frequency Range

Frequency Response

Dispersion
Maximum SPL
Unit / mm
Packing / mm
Weight / kg
Net weight / kg
Transducer
Low Frequency
Section
Nominal Impedance
Sensitivity
High Frequency
Nominal Impedance
Sensitivity

CX-15SUB/P
15" Bass
25 Hz to 1.5 kHz
(-10 dB)
35 Hz to 250 Hz
(+/- 3 dB)

133 dB SPL
492x600x540
678x570x620

 

15" driver 4" Voice
Coil 500W
8 ohms
98dB


CX-18SUB/P
18" Bass
20 Hz to 1.5 kHz
(-10 dB)
30 Hz to 250 Hz
( +/- 3 dB)

136 dB SPL
569x694x625
641x766x704

 

18" driver 4" Voice
Coil 600W
8 ohms
98dB


 

Active System
Internal Amplification Output
(at nominal load)
Output (Continuous IEC shaped pink
noise into rated load impedance)
Output Section
Audio Input connector
Network control connector
Signal Processing
System Management

AC Power Operating Range
AC Input Connector
AC Loop-thru
AC Current Requirement


1800 Watts Peak
1200W / 8ohms 1%THD


1-Channel
XLR with loop-through

Build in 100Hz LPF

100-120VAC or 200-240VAC, 50/60Hz
Neutrik PowerCon
Neutrik PowerCon
20A per system at 115V,
16A per system at 230V


 

 

Regal Technology Co., Ltd.
Add: No 2, Shiji Road, Jindu Town, Gaoyao City, Guangdong, China.
Tel: 86-758-8519997; Fax: 86-758-8519994; Email: export@regal.com.cn; fICP06037016